65 Ferro Silicon Inoculant
65 Alloy Lump Ferro Silicon
65 Ferro Silicon 10-50mm
Chemical Grade FeSi 65

FeSi Inoculant 65

65 Ferrosilicon inoculant is a kind of inoculant that promotes graphitising, reduces the tendency of white mouth, improves the graphite morphology and distribution, and increases the number of eutectic clusters, which has a good effect in a short period of time after the inoculation treatment (about 5-8 minutes).

Send Inquiry

Product Introduction

65 Ferro Silicon Lump Alloy Description

Ferrosilicon inoculant because of its index content is not the same, the use of value and market price is not the same. 45FeSi inoculant inoculant inoculation treatment effect is poor, and the use of 85FeSi cost is too high, so now the steel foundry with inoculant commonly used in 75FeSi and 72FeSi. ferrosilicon in the Ca and Al in the inoculant has a great influence on the effect of the inoculant, of which the Ca effect is greater, in greater than 0.5% has a strong graphite ability. 75FeSi aluminium content is 1.5%, 72FeSi aluminium content is 2%. 0.5% has a strong graphite capacity. 75 FeSi aluminum content is 1.5%, and 72 FeSi aluminum content is 2%.

Grade	≥	(Chemical composition)≤ %
	Si	Al	Ca	Mn	Cr	P	S	C
FeSi65	65	2	1	0.8	0.5	0.04	0.02	0.2

Dimensions :
1. lump:10-30mm, 30-50mm, 50-100mm, or as per client's requirement.
2. briquette:50*50mm or as per client's requirement.
3. Powder:325mesh, 200mesh, 300mesh, 65mesh or customized.
4. Granules:0.3-1mm, 1-3mm, 3-8mm or customized.

We have Ferrosilicon 75, Ferro Silicon 65, Ferro Silicon 72, Ferro Silicon 70, Ferrosilicon Powder and other products.

If you are interested in our products, contact us now! We can customize our products according to customer requirements!

If you would like to know the price or other information, please contact us.

Inquiry >> info@zaferroalloy.com

SPECIFICATION of 65 Ferro Silicon Alloy 10-50mm

Ferrosilicon inoculant 65 tips:

The use of high-efficiency inoculant must be placed in the iron, of course, the iron out of the iron can flow out with the iron, to get a good casting effect, so there a very strict operating requirements. High-efficiency inoculant is very easy to decline, to prevent such a situation, we need to increase the rate of spheroidisation of high-efficiency inoculant, in this way, it can be very good to improve the smoothness of the surface of the product, which will not appear uneven.

COMPANY ENVIRONMENT SHOW

45 FeSi Lumps manufacturer 45 FeSi Lumps supplier

Click Here to send us a message to get the information and price you want!

OUR SERVICE

Free on-site touring and introduction of our factory.

We can guarantee on-time delivery of samples and goods.

Close follow-up of all orders by special person and keep customers informed timely.

All after-sale requests will be responded to in 24 hours.

75 Ferro Silicon Alloy supplier 75 Ferro Silicon Alloy manufacturer

CUSTOMER VISITS

70 Fe Silicon price

Packing & Delivery

Packing: In 1MT big bag or 50kg/bag or 50kg/drum; or according to your requirements.

75 Ferro Silicon factory 75 FeSi factory

Inquiry >> info@zaferroalloy.com

FAQ

Q: May I know which payment will be accepted by your company?

A: So far 100%T/T before shipment, and 30% deposit paid by T/T, balance paid by L/C are available.

Q: Can you arrange the shipment?
A: Sure, we have a permanent freight forwarder who can gain the best price from most shipping companies and offer professional service.
Q: Can we visit your factory?
A: Warmly welcome once we have your schedule we will pick you up.
Q: What is the time of delivery? Do you have it in stock?
A: Yes, we have it in stock. The exact delivery time depends on your detailed quantity and is usually around 7-15 days.

Hot Tags: FeSi Inoculant 65, China FeSi Inoculant 65 manufacturers, suppliers, factory, Molybdenum Copper rod manufacturers, Ferrosilicon Powder, 45 Ferrous Silicon, Titanium Foil Roll, Iron Silicon Alloy, FeSi 75 Powder

45 Ferro Silicon Inoculant

Ferro Silicon 75% Inoculant