Jan 31, 2024 Leave a message

Classification Of Cast Titanium Alloys And Their Characteristics, Grades, And Chemical Compositions

Titanium alloy has good comprehensive properties and is an excellent structural material with wide applications. However, the cost performance of titanium alloy is low, the parts are difficult to machine, and the cost is high. Through casting methods, especially precision casting, parts with complex shapes can be directly manufactured, eliminating a large number of machining processes and increasing the material utilization rate to close to 90%.

cast titanium alloys manufacturers
Cast titanium alloys are usually divided into a, a+B and beta alloys according to phase composition. According to custom, they are also divided into cast high-strength, heat-resistant and corrosion-resistant titanium alloys. Among them, cast Ti-6Ai-4V and T5Ai-2.5Sn are widely used cast titanium alloys. They are characterized by medium strength, heat resistance, corrosion resistance, and good plasticity. They are especially suitable for use in aerospace engines and structural castings. .

cast titanium alloys suppliers
ZTC6 is a near-alpha titanium alloy developed based on Ti6242 alloy. The aluminum content of this alloy is controlled below 8%. It has good high-temperature thermal stability and has been applied to engine parts below 500°C. ZTC3 (Ti-Al-Mo-Si series) can also be used for a long time below 500°C. Due to the addition of the rare earth element Ce, the alloy has good heat resistance. Cast Ti153 alloy (Ti-15V-3Al-3Cr-3Sn) is a metastable B-type high-strength titanium alloy. The alloy can be solid solution and age strengthened. The strength of the alloy can reach more than 1200MPa, and the alloy has an elongation of more than 5%. Growth rate. ZTC5 alloy is a high-strength titanium alloy independently developed in my country. It is an a+ type cast titanium alloy developed on the basis of Ti-Al-Mo-Sn-Zr heat-resistant titanium alloy. Through the addition of rapid eutectoid elements, the The strength of the alloy during aging is not only high strength and toughness, but also has good thermal stability when used below 350°C.

cast titanium alloys factory

Send Inquiry

Home

Phone

E-mail

Inquiry