Polyurethane Enamelled Copper Wire UEW 180 | 0.04-1.80mm

 

Polyurethane Enamelled Copper Wire UEW/N 180 is a round solid copper winding wire with an enamel insulation system and a thermal class of 180. The current product specification covers conductor diameters from 0.04 mm to 1.80 mm.

The main characteristics of polyurethane enamelled wire on this page are direct solderability, high-frequency performance and moisture resistance. These properties make the product relevant to motors, transformers and other electrical or electronic winding applications where the required diameter, insulation performance and winding conditions must be controlled.

The current page lists IEC 60317-51 and MW 83-C as reference specifications. Before ordering, confirm the conductor diameter, thermal class, insulation build, spool requirement, quantity and applicable test requirements.

 

Direct Solderability

One of the main characteristics stated for polyurethane enamelled wire is direct solderability. This is useful when your winding and terminal process requires an enamelled copper wire that can be connected through a suitable soldering process without treating it like a conventional mechanically stripped wire.

The actual soldering temperature, time and process should be validated with your own production equipment and wire diameter.

Suitable for High-Frequency Applications

The current product description also identifies good high-frequency resistance as an important feature of polyurethane enamelled wire.

If your application is a high-frequency transformer, coil or other electronic winding component, confirm the required electrical performance, wire diameter and insulation specification before order approval.

Moisture Resistance

Polyurethane enamelled wire is also described as having good moisture resistance. If your finished component has a specific humidity or environmental test requirement, include the required test condition in the purchase specification.

 

Specification Item	Current Reference
Model	UEW/N 180
Conductor	Copper
Conductor Type	Solid
Wire Shape	Round wire
Diameter Range	0.04–1.80 mm
Thermal Class	180
Insulation	Enamelled
Primary Applications	Motors and transformers
Reference Standards	IEC 60317-51 / MW 83-C
HS Code	85441100
Origin	China

If your winding specification defines tighter conductor tolerance, enamel build, electrical properties or another thermal class, send the complete technical requirement before quotation.

 

The current UEW/N 180 product range covers 0.04–1.80 mm. Diameter should be selected according to your winding design rather than only according to product availability.

Fine Wire

Fine diameters are relevant when your winding design requires compact coils, small components or a larger number of turns within limited winding space.

Medium and Larger Diameters

Larger conductor diameters may be required for winding designs with different current, mechanical handling or coil requirements.

Before quotation, send the exact nominal conductor diameter and any permitted tolerance. If your drawing specifies finished wire diameter rather than bare conductor diameter, state that clearly in the inquiry.

 

This specific UEW/N product is listed as Thermal Class 180.

The broader polyurethane enamelled wire family on the source page also mentions thermal grades 130, 155 and 180, but this product specification should be ordered according to the exact class required by your winding design.

Do not substitute one thermal class for another only because the conductor diameter is the same. Thermal class, insulation system and the applicable product standard should be confirmed together.

 

The current product specification lists IEC 60317-51 and MW 83-C as reference standards.

If one of these standards is mandatory for your project, state the required standard in the RFQ and identify any additional dimensional, electrical, mechanical or thermal tests required by your internal specification.

The applicable inspection and acceptance criteria should be confirmed before order approval rather than assumed from the standard number alone.

 

Transformers

UEW polyurethane enamelled copper wire can be used in transformer windings where the selected conductor diameter, thermal class and insulation performance match the transformer design.

For high-frequency transformer applications, confirm the operating conditions and wire specification before selecting the final diameter.

Motors

The current product specification identifies motors as a primary application. The correct wire should be selected from the motor winding design, required thermal class, conductor diameter and insulation requirement.

Inductors and Electromagnetic Coils

Polyurethane enamelled copper wire can also be considered for inductive and electromagnetic winding applications where a round insulated copper conductor is required.

Electronic and Precision Windings

The source information also associates polyurethane enamelled wire with electronic appliances, precision instruments, telecommunications and meters.

For these applications, provide the actual electrical and dimensional requirements rather than ordering only by the generic term "polyurethane enamelled wire."

 

 

A wire order should be accepted against the same dimensional and performance requirements that were confirmed before production.

Conductor Diameter

Confirm that the supplied conductor corresponds to the nominal diameter and tolerance specified in the purchase order.

Insulation Requirement

Confirm the required enamel system and any applicable insulation-build requirement before production.

Thermal Class

For this page, the current model is UEW/N 180. Make sure the supplied product and related documents correspond to the required thermal class.

Electrical and Mechanical Tests

If your internal standard requires specific electrical, mechanical, winding or solderability tests, include the test items and acceptance method in the RFQ.

Test Report and Samples

Product samples and test information can be discussed before the bulk order. If sample approval is part of your purchasing process, specify the wire diameter and tests required for approval.

 

Enamelled copper wire is normally supplied on spools suitable for wire handling and transportation. The original page also lists standard export packing with wooden pallets.

Because the correct spool depends on wire diameter, order quantity and your winding equipment, confirm the spool and packing requirement before quotation.

For an accurate order, specify:

• Wire diameter
• Thermal class
• Required standard
• Spool requirement
• Net weight per spool if controlled
• Total quantity
• Export packing requirement

 

RFQ Item	Information to Provide
Wire Type	Polyurethane enamelled copper wire / UEW/N
Diameter	Required nominal diameter within 0.04–1.80 mm
Thermal Class	Class 180 for the current UEW/N 180 model
Standard	IEC 60317-51 / MW 83-C or your required specification
Application	Motor, transformer, coil or other winding application
Spool	Required spool type or dimensions if controlled
Quantity	Trial or bulk quantity
Destination	Destination port or delivery location
Documents / Tests	Required test report, inspection items or sample approval

 

Send us your required conductor diameter, thermal class, applicable standard, application, spool and quantity.

If your drawing specifies conductor tolerance, insulation build, electrical properties, solderability test or another acceptance condition, include these requirements in the RFQ so the quotation can be prepared on the correct technical basis.

Request UEW Copper Wire Quote