Titanium alloy is a high-performance material widely used in the field of aerospace technology. Its light weight, high strength, good toughness and corrosion resistance are its most significant characteristics. For manufacturing cars, titanium alloy is the only material among many metal materials that has high strength, low density, excellent fatigue and corrosion resistance, and low elastic modulus, so it is very ideal. materials to manufacture cars locally.

In addition, titanium alloys are also widely used in medical equipment, chemical equipment, military industry (military TC4 titanium rods, titanium plates) and sports equipment (titanium golf clubs) materials. Due to the complex processing technology, the materials are expensive, which is the main reason for the higher product prices. Titanium alloy, like many alloy metals, is also composed of titanium and some useful metal components to meet the requirements for material performance, but titanium accounts for more than 90% of its main components. Two alloys are commonly used in aerospace technology, namely Ti6AL4V (6% aluminum, 4% vanadium, 90% titanium) and Ti3AL2.5V (3% aluminum, 2.5% vanadium, 94.5% titanium).

TC4 titanium alloy has good room temperature and high temperature mechanical properties and is widely used in the manufacture of aviation structural parts and fans and drums of aerospace engines. It has accounted for more than 50% of the total titanium alloys used in aviation. Many load-bearing structural parts of aircraft, especially variable cross-section structural parts, require the raw material titanium rods to have good notch stress fracture properties. The purpose is to ensure that the parts have a strong ability to inhibit crack initiation and expansion under conditions of high stress concentration. without causing breakage and failure. It is generally believed that higher hydrogen content or poor structural uniformity in TC4 titanium alloy will reduce its room temperature notch stress fracture performance. In industrial mass production, it is also common for such rods to have unqualified notch stress fracture properties due to improper workmanship.

When the middle and lower rollers pass the material, the rolling force continuously impacts the middle roller, causing the anti-loosening device of the skew wedge to quickly fail, and the stable state of the middle roller to be fixed is destroyed; the adjusted pass shape is destroyed as the middle roller is fixed to the stable state The change will affect the dimensional stability of the titanium rod and ultimately the quality of the finished product; during the rolling process, in order to prevent the bakelite tile structure from heating and wearing out, cooling water must be poured into the cup to cool and lubricate the bakelite keel, and cold water will often spray onto it. On the surface of the roll, the surface of the billet overflows and falls quickly, especially when rolling titanium and titanium alloys. Due to the poor thermal conductivity of titanium and titanium alloys, the temperature difference between the inside and outside of the bad material will be greater, which is not conducive to the uniform deformation of the billet and the rolling accuracy. There is no guarantee; the friction resistance of the side fixation method of the inclined wedge is large, and the power consumption during rolling is also large. Even if a 630kW motor is used, boring phenomenon will often occur, affecting production. After the 250 rolling mill was changed from a bakelite tile structure to a bearing structure, the size of the titanium and titanium alloy bars rolled was stable, the outer surface quality was improved, and the yield rate was improved.









