Mar 07, 2024 Leave a message

How To Use The Built-in Powder in Cored Wire

There are generally three ways of adding core wire powder:

 

1, core wire powder is melted, crushed and sieved from various alloys, and then packaged into core wire;.
2, core wire powder is used in different densities, different particles of powder by manual mixing and wrapping into core wire, but due to the different specific gravity of different powders, mixing is very difficult;.
3,The feeding method of core wire powder is to use several hoppers for feeding. Due to the different specific gravity of various powders, the falling speed will be different, so it is difficult to accurately control the falling amount of different materials in the hopper, especially the uniformity of various powders.

news-700-466
Core wire powders are mixed online with high precision to fill the core wire without any segregation of components. The core wire is physically mixed from the strip and powder of various compositions. Powders of different densities and compositions are uniformly wrapped in the core wire in a certain proportion. The mixing method is: weighing with high precision belt online mixing combination, weighing with weighing unit, and then conveyed with belt conveyor, and then wrapped with strip steel to mix various powders of different composition and materials.

news-700-466
The main components of the cored wire powder are ferrosilicon and pure magnesium, which are mixed online by high-precision belts in a certain particle size and proportion. Take mixed spheroidal wire as an example, the weight of each mass is 210g, of which ferrosilicon accounts for 70% is 147g and magnesium particles are 63g. the precision of core wire unit powder produced by on-line mixing method is 1.2-1.8%.

news-700-466

Send Inquiry

Home

Phone

E-mail

Inquiry