Consistent Quality Ferro Vanadium For Industry
video

Consistent Quality Ferro Vanadium For Industry

Uniform batch quality
Stable alloying results
Reduces production variation
Suitable for long-term supply
Send Inquiry
Product Introduction

Ferrovanadium (FeV): Quick Answer

 

Ferrovanadium (FeV) is an iron-vanadium alloy you add to steel and other alloys to introduce vanadium. FeV50 is our standard grade, and FeV60 and FeV80 are available on request. We supply lumps or screened granules, with a COA and a lot identification sheet for each shipment. Which grade you need depends on how much vanadium you must add and how your furnace or ladle is charged. Send us your steel grade, target vanadium and charging method, and we will confirm the grade, size and packing before you order.

 

FeV50, FeV60 and FeV80 Grades and Specifications

 

Grade Vanadium content Why you might choose it
FeV50 50–55% (our standard grade) Larger addition weight, which many melt shops find easier to control, especially in smaller melts
FeV60 About 58–65% A middle option between addition weight and vanadium concentration
FeV80 About 80%, exact range set in the contract Less weight per unit of vanadium, which can simplify handling and logistics

 

Item Details
Material Ferrovanadium (FeV), iron balance
Impurity limits Carbon, silicon, aluminum, phosphorus and sulfur are set per grade and contract. The standard limits for FeV50 are on our FeV50 ferro vanadium page
Delivery form Lump or screened granule
Common sizes 10–50 mm, 50–100 mm, custom screening available
Packing Steel drums (250 kg or 100 kg), 25 kg bags or big bags, custom packing available
Documents COA and lot identification sheet

Confirm the final grade, size and packing in writing before you order, because packing options vary by grade and size.

Request Specification

How Do You Choose Between FeV50, FeV60 and FeV80?

 

The main difference is how much vanadium each ton carries. A higher grade means you add less weight for the same vanadium target. A lower grade means a larger addition weight, which can be easier to dose and mix in smaller melts and ladles. Your dosing system and your charging method matter as much as the grade itself.

When you compare quotes, compare the cost per kilogram of contained vanadium, not the price per ton of alloy:

Cost per kg of vanadium = price per kg of alloy ÷ vanadium fraction of the grade

If you are also considering vanadium pentoxide as the vanadium source, read our guide on vanadium pentoxide flakes vs ferrovanadium. For the basics of each grade, see our ferro vanadium guide, or browse the full ferro vanadium range.

Where Is Ferrovanadium Used?

 

  • Rebar and structural steel: Vanadium refines grain and adds precipitation strengthening, so you can reach a higher strength class with a lean composition.
  • Tool, die and high-speed steel: Vanadium forms hard carbides that support wear resistance and hardness at working temperature.
  • Springs, forgings and fasteners: Vanadium limits grain coarsening during forging and heat treatment.
  • Alloy production: FeV gives you a controlled vanadium input when you make alloys to a fixed composition.

How Do You Check Lot-to-Lot Consistency When You Buy FeV?

 

If you buy ferrovanadium for repeat production, consistency matters more than any single lab number. You can check it in a few practical steps:

  • Match the lot sheet to the drums or bags. The lot identification sheet should match the marking on what you receive.
  • Compare the COA with your own analysis. Check vanadium first, then carbon, silicon, aluminum, phosphorus and sulfur against your grade limits.
  • Check size and packing. Compare the size range with your order and look for damaged or damp packing.
  • Record vanadium recovery per lot. Your own heat data is the best evidence that a lot behaves like the last one.
  • Fix the specification in the contract. For regular orders, agree the grade, impurity limits and size range once, and keep them the same on each order.

Our Ferrovanadium Supply and Certificates

 

We supply ferrovanadium as part of our vanadium series, alongside vanadium nitrogen alloy and vanadium pentoxide, and we support customers who buy FeV on a repeat basis. You can ask us to coordinate supply for ongoing consumption, and we will confirm lot marking, packing and documents before each shipment.

our team discussing ferrovanadium products with overseas customers
Discussing ferrovanadium supply with overseas customers
ferrovanadium company overview
Ferrovanadium company overview

 

Our qualifications
 
 
ISO 9001 certificate

ISO9001

ISO 14001 certificate

ISO14001

ISO 45001 certificate

ISO45001

SGS document

SGS

 

Get a Ferrovanadium Quote

 

Send your grade, target vanadium, size, packing and destination port, and we will confirm the specification before quotation. You can also email us at business@zaferroalloy.com.

Get a Quote

Ferrovanadium FAQ

 

Q: How do I choose between lumps and screened granules?

A: Choose by your feeding method. Lumps suit charging into a furnace or ladle by hand or by chute, and screened granules suit feeding systems that need a narrower size range. Tell us how you add the alloy and we will suggest a size.

Q: Which documents come with each shipment?

A: A COA and a lot identification sheet are available with each shipment. If you need other documents, ask before you order so they can be arranged.

Q: Can I order ferrovanadium on a regular schedule?

A: Yes. We support repeat purchasing and can coordinate supply for ongoing consumption. Share your expected monthly quantity so we can confirm the arrangement.

Q: What should I include when I specify a grade in my inquiry?

A: Include the grade (FeV50, FeV60 or FeV80), the impurity limits you need for carbon, silicon, aluminum, phosphorus and sulfur, the size range, the packing and the quantity. This lets us confirm the specification before we quote.

Q: How do I check that a new lot matches the previous one?

A: Compare the COA of the new lot with the last one, then confirm it with your own analysis on arrival. Keep the lot number with your heat records so you can trace vanadium recovery back to each lot.

Q: Can ferrovanadium be replaced by vanadium pentoxide?

A: In some processes, yes. It depends on your furnace, your reduction practice and the cost of contained vanadium. See our 98% vanadium pentoxide flakes before you decide.

 

Hot Tags: consistent quality ferro vanadium for industry, China consistent quality ferro vanadium for industry manufacturers, suppliers, factory, ferro alloy for printing industry, ferro alloy for mining industry, ferro alloy for transport industry, ferro alloy for state hemp industry, ferro alloy for plastic industry, ferro alloy for cement industry

Send Inquiry

Home

Phone

E-mail

Inquiry