98% Carbon Additive GPC
video

98% Carbon Additive GPC

Grade: Industrial Grade
Crystal Morphology: Compact Crystalline Graphite
Composition: Graphite Petroleum Coke
Forming Way: Crush
Transport Package: Plastic Bag in Ton Bag
Specification: 20kgs/bag 25kg/bag
Production Capacity: 150000
Send Inquiry
Product Introduction

98% Graphitized Petroleum Coke Description

 

GF-GPC-98 Graphitized Petroleum Coke is a carbon additive with a minimum fixed carbon content of 98.0%. It is produced through high-temperature graphitization of petroleum coke and processed into different particle sizes for industrial carbon adjustment.

This grade has a specified maximum sulfur content of 0.20%, ash content of 0.70%, volatile matter of 0.70% and nitrogen content of 500 ppm. These chemical limits help buyers evaluate its suitability against the carbon and impurity requirements of their metallurgical processes.

GF-GPC-98 is listed in particle sizes ranging from 0.2–1 mm to 5–20 mm. The selection should consider the feeding equipment, addition method, required particle-size distribution and operating conditions. Before ordering, confirm the guaranteed chemical limits and actual batch results through the applicable product specification and Certificate of Analysis (COA).

GF-GPC-98 Graphitized Petroleum Coke carbon additive with 98% minimum fixed carbon

GF-GPC-98 Technical Specifications

The following table presents the listed chemical and physical specifications of GF-GPC-98. Fixed carbon is expressed as a minimum value, while sulfur and other impurities are expressed as maximum limits.

Parameter GF-GPC-98 Specification(%)
Product Grade GF-GPC-98
Fixed Carbon (FC) 98.0 Min
Sulfur (S) 0.20 Max
Ash 0.70 Max
Volatile Matter (VM) 0.70 Max
Moisture 0.50 Max
Nitrogen (N) 500 Max
Particle Size 0.2–1 / 1–3 / 1–5 / 5–10 / 5–15 / 5–20
Size Distribution 90 Min
Packaging 15 kg / 20 kg / 25 kg bags / Ton bags

Specification note: The chemical values above are taken from the listed GF-GPC-98 product specifications. The minimum 90% particle-size requirement should be confirmed for the selected size range. Final purchasing specifications should identify the guaranteed limits, testing methods and batch acceptance criteria.

Understanding the GF-GPC-98 Chemical Parameters

Fixed Carbon: The minimum fixed carbon content of 98.0% indicates the specified carbon concentration of the material. Buyers should distinguish fixed carbon content from actual carbon recovery during melting.

Sulfur: The maximum sulfur content is 0.20%. The acceptable sulfur contribution should be evaluated against the requirements of the finished steel or iron and the sulfur already present in other charge materials.

Nitrogen: The maximum nitrogen content is 500 ppm. Buyers with specific nitrogen-control requirements should verify the actual batch analysis rather than relying solely on the grade designation.

Ash and Volatile Matter: The listed maximum values are 0.70% each. These parameters should be checked alongside fixed carbon and other impurities when evaluating incoming carbon additives.

Moisture: The maximum listed moisture content is 0.50%. Proper storage and moisture-resistant packaging help maintain the condition of the material during handling and transportation.

GF-GPC-98 Particle Size Options

GF-GPC-98 is listed in six particle-size ranges. The appropriate size depends on the charging method, material feeding equipment and the time available for carbon dissolution in the molten metal.

Particle Size Selection Considerations
0.2–1 mm Fine particle size. Confirm dust control, storage conditions and compatibility with the feeding system.
1–3 mm Suitable for evaluating finer granular feeding requirements and the available addition equipment.
1–5 mm Confirm the in-range percentage, fines content and compatibility with the intended charging method.
5–10 mm Check particle-size compatibility with the furnace charging system and material handling process.
5–15 mm Evaluate the larger granule range against the charging equipment and process requirements.
5–20 mm Confirm the acceptable oversize fraction and compatibility with the material feeding arrangement.

What Does 90% Minimum Particle-Size Distribution Mean?

The listed specification requires at least 90% of the material to fall within the agreed nominal particle-size range, subject to confirmation for the selected product size.

For example, if the ordered specification is 1–5 mm, the sieve analysis should establish the proportion of particles within that range. Buyers should also agree on the maximum permitted undersize and oversize fractions.

For consistent bulk-material acceptance, request the applicable sieve analysis and define the screening tolerances in the purchase specification.

Applications of 98% GPC Carbon Additive

Carbon Adjustment in Steelmaking

GF-GPC-98 can be considered as a carbon additive in steelmaking operations where its fixed carbon and impurity limits meet the required steel chemistry. The addition point, charging method and target carbon content determine the appropriate particle size and addition quantity.

Steelmakers should account for the carbon contributed by all charge materials and verify the actual carbon recovery under their operating conditions. The listed 98% fixed carbon content describes the material composition, not a guaranteed recovery rate.

Carbon Adjustment in Foundry Melting

In gray iron and ductile iron production, carbon additives are selected according to the target carbon equivalent, base iron composition and melting practice.

Before using GF-GPC-98, foundries should evaluate its sulfur and nitrogen contribution alongside the other charge materials. The required particle size should also match the addition method and available melting time.

Metallurgical Carbon Addition

For other metallurgical applications, the grade should be evaluated against the required carbon content, impurity limits and material handling conditions. A product should only be approved after its chemical specification and actual process suitability have been established.

GF-GPC-98 Quality Inspection and COA

For bulk procurement, the product specification and batch Certificate of Analysis (COA) should be reviewed together. The specification defines the agreed acceptance limits, while the COA reports the test results for the identified batch.

We recommend checking the following items before approving a shipment:

Inspection Item Verification Requirement
Fixed Carbon Verify that the test result meets the agreed minimum of 98.0%.
Sulfur Check that the reported sulfur content does not exceed 0.20%.
Nitrogen Verify the reported nitrogen result and confirm the unit in ppm.
Ash Check the result against the maximum limit of 0.70%.
Volatile Matter Verify the maximum limit of 0.70%.
Moisture Verify the maximum limit of 0.50%.
Particle Size Request sieve analysis for the ordered size range and agreed distribution.
Batch Identification Check that the COA corresponds to the relevant production or shipment batch.

Where third-party inspection is required, the inspection agency, sampling method, testing scope and acceptance criteria should be agreed before shipment.

98% GPC Packaging and Transportation

GF-GPC-98 is listed with several packaging options to accommodate different order quantities and handling requirements.

Packaging Type Net Weight Purchasing Considerations
Small Bags 15 kg Confirm bag material and outer packing requirements.
Small Bags 20 kg Suitable where smaller individual handling units are required.
Small Bags 25 kg Confirm palletizing and container loading requirements.
Jumbo Bags Ton Bags Confirm the net weight, lifting arrangement and unloading method.

For sea freight, buyers should specify any requirements for moisture-resistant inner liners, sealed packaging, palletizing and container protection. The final packaging arrangement should be confirmed according to the destination and transportation conditions.

Typical export documents can include:

  • Commercial Invoice
  • Packing List
  • Bill of Lading
  • Certificate of Origin, where required
  • Batch Certificate of Analysis, subject to confirmation

Supplier evaluation is an important part of industrial carbon material procurement. Buyers should review the supplier's product specifications, quality documentation, packaging arrangements and ability to coordinate export orders.

For GF-GPC-98 purchasing, the agreed fixed carbon, sulfur, nitrogen, particle size and packaging requirements should be clearly documented before order confirmation.

ZhenAn industrial factory facility for metallurgical material supply

Customer visits provide an opportunity to discuss product specifications, quality requirements, inspection procedures and order arrangements.

For bulk GPC orders, technical requirements should be agreed before shipment, including the selected particle size, chemical limits, packaging and applicable quality documents.

Customer visit to ZhenAn industrial material supplier

What Information Is Needed for a GF-GPC-98 Quotation?

To receive an accurate quotation, provide the required technical specifications and commercial details. This allows the product grade, particle size, packaging and delivery terms to be checked against your purchasing requirements.

RFQ Information Details to Confirm
Product Grade GF-GPC-98
Fixed Carbon 98.0% minimum or other agreed requirement.
Sulfur and Nitrogen Maximum acceptable sulfur and nitrogen contents.
Other Chemical Limits Ash, volatile matter and moisture requirements.
Particle Size 0.2–1 / 1–3 / 1–5 / 5–10 / 5–15 / 5–20 mm.
Quantity Required quantity in metric tonnes.
Packaging 15 kg / 20 kg / 25 kg bags or ton bags.
Destination Destination port or delivery location.
Incoterms FOB, CFR, CIF or other agreed delivery terms.
Quality Documents COA, sieve analysis and third-party inspection requirements.

98% Graphitized Petroleum Coke FAQ

What Is GF-GPC-98?

GF-GPC-98 is a grade of Graphitized Petroleum Coke with a listed minimum fixed carbon content of 98.0%. Its listed maximum sulfur content is 0.20%, ash 0.70%, volatile matter 0.70%, moisture 0.50% and nitrogen 500 ppm.

What Is the Sulfur Content of 98% GPC?

The listed maximum sulfur content of GF-GPC-98 is 0.20%. Buyers should confirm the actual batch result and determine whether this limit is acceptable for their steelmaking or foundry process.

What Particle Sizes Are Available for GF-GPC-98?

The listed particle-size options are 0.2–1 mm, 1–3 mm, 1–5 mm, 5–10 mm, 5–15 mm and 5–20 mm. Confirm the availability of the selected size and its sieve distribution before placing an order.

What Does 98% Fixed Carbon Mean?

It means the product has a specified minimum fixed carbon content of 98.0%. This is a chemical composition requirement and should not be interpreted as a guaranteed 98% carbon recovery rate during melting.

Can GF-GPC-98 Be Used for Steelmaking and Foundry Applications?

GF-GPC-98 can be evaluated for carbon adjustment in steelmaking and foundry melting where its chemical composition meets the process requirements. The appropriate particle size and addition method depend on the furnace, charging equipment and operating conditions.

What Packaging Options Are Available?

The listed packaging options include 15 kg, 20 kg and 25 kg bags, as well as ton bags. Confirm the required bag weight, inner lining and additional moisture protection when requesting a quotation.

Can I Request a Sample Before Bulk Purchasing?

The original product information indicates that samples may be provided without a material charge, while freight is paid by the buyer. Confirm sample availability, quantity, freight costs and the relationship between the sample and the proposed bulk product before dispatch.

Can You Provide a Certificate of Analysis (COA)?

Specify your COA requirements when requesting a quotation. The applicable report should identify the tested batch and cover the agreed chemical parameters. Confirm the availability of batch-specific documents before order approval.

What Information Should I Provide for a Quotation?

Provide the required GF-GPC-98 grade, particle size, chemical limits, order quantity, packaging, destination port and preferred Incoterms. Include any COA, sieve analysis or third-party inspection requirements so that the quotation can match your purchasing specification.

Hot Tags: 98% carbon additive gpc, China 98% carbon additive gpc manufacturers, suppliers, factory, carbon raiser for customer service, carbon raiser for maintaining, carbon raiser for bolting, carbon raiser for advertising, carbon raiser for inventory management, carbon raiser for marketing

Send Inquiry

Home

Phone

E-mail

Inquiry