1-5mm Graphite Petroleum Coke
video

1-5mm Graphite Petroleum Coke

Model NO.: S 0.05%max
Ash: 0.5%Max
Moisture: 0.5%Max
V.M.: 0.7%Max
Size: 1-5mm
Crystal Morphology: Flake Graphite
Type: Graphite Petroleum Coke
Composition: Carbon>99%
Forming Way: Granules
Transport Package: Jumbo Bags
Production Capacity: 2000tons/Month
Send Inquiry
Product Introduction

1-5mm Graphitized Petroleum Coke Description

 

1-5mm Graphitized Petroleum Coke (GPC) is a screened granular carbon additive designed for metallurgical carbon adjustment. This product listing focuses on the 1-5mm particle-size range, with GPC-98 and GPC-99.0 listed as available chemical grade options. Buyers can select the grade according to their fixed carbon requirements and acceptable sulfur, ash and nitrogen limits.

The listed GPC-98 grade contains a minimum of 98% fixed carbon and a maximum sulfur content of 0.05%, while GPC-99.0 contains a minimum of 99% fixed carbon and a maximum sulfur content of 0.03%. Both grades have a listed moisture limit of 0.50%. The appropriate grade depends on the required carbon contribution and impurity limits of the production process.

For 1-5mm GPC procurement, particle-size distribution is as important as nominal size. Buyers should confirm the percentage of material within the 1-5mm range, the allowable undersize and oversize fractions, and the applicable screening method before placing an order. The material can be evaluated for carbon adjustment in steelmaking and foundry melting, subject to the actual chemical requirements and operating conditions.

1-5mm Graphitized Petroleum Coke granular carbon additive

 

1-5mm GPC Chemical Specifications

The following table presents the listed chemical specifications for GPC-98 and GPC-99.0. Both grades are included in the product range, but the selected grade and its availability in the 1-5mm size should be confirmed when placing an order.

Parameter GPC-98(%) GPC-99.0(%)
Fixed Carbon (F.C.) 98 Min 99.0 Min
Sulfur (S) 0.05 Max 0.03 Max
Ash 1.00 Max 0.50 Max
Volatile Matter (V.M.) 1.00 Max 0.50 Max
Moisture 0.50 Max 0.50 Max
Nitrogen (N) 0.03 Max 0.03 Max
Hydrogen (H) 0.01 Max 0.01 Max
Product Particle Size 1-5 mm

Specification notes:

  • Fixed carbon is expressed as a minimum value; sulfur, ash, volatile matter, moisture, nitrogen and hydrogen are expressed as maximum values.
  • The listed nitrogen content of 0.03% is equivalent to 300 ppm by mass.
  • The listed hydrogen content of 0.01% is equivalent to 100 ppm by mass.
  • The chemical specifications should be confirmed against the applicable product specification and batch analysis.
  • Particle-size distribution and screening tolerances should be agreed separately for the 1-5mm order.

GPC-98 vs. GPC-99.0: Which Grade Should You Select?

The main difference between these two listed grades is their fixed carbon content and impurity limits.

GPC-98: With a minimum fixed carbon content of 98% and a maximum sulfur content of 0.05%, this grade can be evaluated where the buyer's carbon and impurity requirements are compatible with these limits.

GPC-99.0: With a minimum fixed carbon content of 99% and a maximum sulfur content of 0.03%, this grade offers a higher specified fixed carbon level and a lower specified sulfur limit.

When comparing the two grades, consider the complete chemical specification rather than fixed carbon alone. The acceptable grade should be determined by the target chemistry of the finished steel or iron, the other charge materials and the purchasing cost.

 

1-5mm Graphitized Petroleum Coke Particle Size

The defining feature of this product listing is its 1-5mm nominal particle size. For industrial buyers, the nominal range is only the starting point. Actual sieve distribution, fine-particle content and oversized material determine whether the supplied material matches the feeding equipment and production process.

Particle Size Description Purchasing Considerations
0-0.1 mm Fine carbon material Check dust generation, storage and feeding requirements.
0.5-5 mm Mixed granular size range Confirm the proportion of fine particles and the accepted size distribution.
1-3 mm Smaller granular fraction Evaluate compatibility with the feeding system and addition method.
1-5 mm Target size range of this product page Specify the required in-range percentage and acceptable undersize and oversize fractions.
3-10 mm Larger granular fraction Check compatibility with the charging equipment and material handling process.
8-25 mm Coarser granular material Confirm charging conditions and the acceptable particle-size distribution.

The particle sizes above are listed product-range options. This page specifically focuses on 1-5mm GPC. Other sizes should be treated as separate purchasing specifications rather than assumed to have identical particle-size characteristics.

Why Does Particle-Size Distribution Matter?

A nominal 1-5mm specification does not automatically mean that every particle falls within the stated range. During screening and material handling, undersize and oversize fractions can affect the consistency of the supplied material.

For a 1-5mm order, buyers should confirm the following acceptance requirements:

  • In-range percentage: The minimum proportion of particles between 1mm and 5mm.
  • Undersize fraction: The maximum permitted quantity of particles smaller than 1mm.
  • Oversize fraction: The maximum permitted quantity of particles larger than 5mm.
  • Screening method: The sieve sizes and testing procedure used to evaluate the product.
  • Inspection basis: The sampling method and acceptance criteria for the supplied lot.

These requirements should be written into the purchase specification when particle-size consistency is important to the customer's feeding and melting process.

1-5mm GPC vs. 0-5mm GPC

Although both products have a maximum nominal particle size of 5mm, their lower size limits are different.

1-5mm GPC excludes particles below the specified 1mm lower limit, subject to the agreed screening tolerance. It is appropriate to evaluate this size where the buyer requires a coarser granular feed.

0-5mm GPC includes finer particles below 1mm. Buyers should pay particular attention to fine-particle distribution, dust handling and the feeding method.

Therefore, the choice between 1-5mm and 0-5mm should be based on the required particle distribution and production equipment, not simply the maximum particle size.

 

Applications of 1-5mm Graphitized Petroleum Coke

Electric Arc Furnace Steelmaking

In electric arc furnace (EAF) steelmaking, carbon additives are used to adjust the carbon content of the metal bath and support the required steel chemistry. The suitability of 1-5mm GPC depends on the charging method, addition timing, target carbon content and furnace operating conditions.

Steelmakers should evaluate the fixed carbon contribution together with the sulfur and nitrogen limits of the selected grade. The addition quantity should be determined from the initial bath analysis, target carbon level and actual carbon recovery achieved in the production process.

Gray Iron and Ductile Iron Foundries

In gray iron and ductile iron production, GPC can be evaluated as a recarburizer for adjusting the carbon content of molten iron. The selected grade should match the foundry's target chemistry and the sulfur and nitrogen contribution permitted by its charge composition.

For 1-5mm material, foundries should consider the furnace type, addition point, feeding equipment and available dissolution time. Particle size alone cannot determine carbon recovery or final iron quality.

Metallurgical Carbon Adjustment

Other metallurgical processes may require carbon additives with specific fixed carbon and impurity limits. Before selecting 1-5mm GPC, buyers should identify the required carbon contribution, material handling conditions and chemical acceptance criteria.

In each application, the final product selection should be based on actual chemical requirements and operating trials rather than an assumed universal performance advantage.

 

1-5mm GPC Quality Inspection and COA Verification

For bulk purchasing, chemical composition and particle-size distribution should be evaluated separately. A chemical analysis confirms the reported composition, while sieve analysis determines whether the material meets the agreed particle-size specification.

Before accepting a shipment of 1-5mm GPC, buyers should review the following quality parameters:

Inspection Item Verification Requirement
Fixed Carbon Verify that GPC-98 or GPC-99.0 meets the agreed minimum fixed carbon content.
Sulfur Check the reported sulfur content against the selected grade's maximum limit.
Nitrogen Confirm the nitrogen result and ensure that the reported unit is consistent.
Ash Compare the test result with the applicable maximum ash requirement.
Volatile Matter Check the result against the specified maximum value.
Moisture Verify the moisture result and agreed testing basis.
Particle-Size Distribution Request sieve analysis for the 1-5mm range, including undersize and oversize fractions.
Batch Identification Confirm that the COA and inspection records correspond to the relevant production or shipment batch.

For orders requiring stricter quality control, the buyer and supplier should agree on sampling frequency, testing methods, inspection responsibilities and acceptance criteria before shipment.

What Should a GPC COA Include?

A Certificate of Analysis should identify the tested material and report the applicable chemical results. For a 1-5mm GPC order, buyers should check that the selected grade and particle size correspond to the material being supplied.

  • Product grade and batch identification.
  • Fixed carbon and sulfur test results.
  • Nitrogen, ash and volatile matter results.
  • Moisture test result.
  • Particle-size distribution or separate sieve analysis, where required.
  • Testing date and applicable test methods.

A sample COA should not automatically be treated as the analysis of a future bulk shipment. Buyers should request the applicable batch documentation and agree on the sampling and inspection procedure.

 

1-5mm Graphitized Petroleum Coke Packaging


The listed packaging options for Graphitized Petroleum Coke include waterproof polypropylene woven bags, individual small bags and small bags packed into jumbo bags. Buyers can select the packaging arrangement according to order quantity, warehouse handling and transportation requirements.
 

Packaging Type Net Weight Description
Waterproof PP Woven Bags 5 kg Small-bag packaging.
Waterproof PP Woven Bags 12.5 kg Small-bag packaging.
Waterproof PP Woven Bags 20 kg Small-bag packaging.
Waterproof PP Woven Bags 25 kg Small-bag packaging.
Waterproof PP Woven Bags 50 kg Small-bag packaging.
Small Bags in Jumbo Bags 1 MT Jumbo Bag Small PP woven bags or paper bags packed into an outer jumbo bag.

 

Moisture Protection During Transportation

GPC should be protected from rain, water exposure and excessive moisture during storage and transportation. Buyers should confirm the bag material, sealing requirements, inner lining and additional container protection before shipment.

For sea freight, packaging should also be compatible with the agreed container loading and unloading arrangements. The final packing method and bag weight should be confirmed in the purchase order.

 

Why Choose ZA Refractories for GPC Supply

 

Product Specification Matching

We can discuss the required GPC grade, fixed carbon content, sulfur limit and 1-5mm particle-size specification according to your purchasing requirements. The selected product parameters should be confirmed before order placement.

Chemical and Particle-Size Verification

For industrial carbon material procurement, chemical composition and particle-size distribution both require attention. Buyers can specify the required test items and acceptance limits before confirming an order.

Flexible Packaging Arrangements

Listed packaging options include 5 kg, 12.5 kg, 20 kg, 25 kg and 50 kg small bags, as well as small bags packed into 1 MT jumbo bags. Final arrangements depend on the selected packaging and order requirements.

Export Order Coordination

We coordinate product specifications, packaging details, order quantities and destination requirements during the quotation process. Buyers should provide their technical and commercial requirements to obtain an accurate quotation.

Learn more about our company on the About Us page.
 

ZhenAn factory facilities for metallurgical and industrial material supply

 

Customer Visits and Business Cooperation

 

Customer visits provide an opportunity to discuss product requirements, quality expectations, inspection arrangements and order coordination. For GPC procurement, the product grade, chemical limits, particle-size distribution and packaging should be agreed before bulk shipment.

Customer visit and business cooperation at ZhenAn

 

What Information Is Needed for a 1-5mm GPC Quotation?

To prepare a quotation that matches your purchasing requirements, please provide the selected GPC grade, particle-size specification, required quantity and packaging details. If your process has strict chemical limits, include them in the inquiry so that the applicable grade can be evaluated.

RFQ Information Details to Provide
Product 1-5mm Graphitized Petroleum Coke.
Grade GPC-98 or GPC-99.0.
Fixed Carbon Required minimum fixed carbon content.
Sulfur and Nitrogen Maximum acceptable sulfur and nitrogen contents.
Other Chemical Limits Ash, volatile matter, moisture and hydrogen requirements, if applicable.
Particle Size 1-5mm, including required sieve distribution and tolerance.
Quantity Required quantity in metric tonnes.
Packaging 5 kg / 12.5 kg / 20 kg / 25 kg / 50 kg bags or 1 MT jumbo bags.
Application Steelmaking, foundry melting or another metallurgical process.
Destination Port Destination port or delivery location.
Incoterms FOB, CFR, CIF or other agreed delivery terms.
Inspection Documents COA, sieve analysis and third-party inspection requirements.

 

1-5mm Graphitized Petroleum Coke FAQ

 

Q1: What Is 1-5mm Graphitized Petroleum Coke?

A1:1-5mm Graphitized Petroleum Coke is a granular carbon additive with a nominal particle-size range of 1mm to 5mm. It can be evaluated for metallurgical carbon adjustment where the selected chemical grade and particle distribution meet the process requirements.

Q2:What Fixed Carbon Grades Are Available for 1-5mm GPC?

A2:The listed product specifications include GPC-98 with a minimum fixed carbon content of 98% and GPC-99.0 with a minimum fixed carbon content of 99%. Confirm the availability of the selected grade in the 1-5mm particle size before ordering.

Q3:What Is the Sulfur Content of 1-5mm GPC?

A3:According to the listed specifications, GPC-98 has a maximum sulfur content of 0.05%, while GPC-99.0 has a maximum sulfur content of 0.03%. The actual batch result should be checked against the agreed purchasing specification.

Q4:What Is the Difference Between 1-5mm and 0-5mm GPC?

A4:The main difference is the lower particle-size limit. 1-5mm GPC is specified for particles between 1mm and 5mm, while 0-5mm GPC also includes finer particles below 1mm. Buyers should compare the actual sieve distribution, fines content and feeding requirements before selecting either size.

Q5:How Do I Check the Particle Size of 1-5mm GPC?

A5:Request a sieve analysis and confirm the proportion of particles within the 1-5mm range. The purchase specification should also define the maximum permitted undersize and oversize fractions and the applicable screening method.

Q6:Is 1-5mm GPC Suitable for Electric Arc Furnace Steelmaking?

A6:It can be evaluated as a carbon additive for EAF steelmaking when its chemical composition and particle distribution meet the process requirements. The addition method, timing, target carbon content and actual carbon recovery should be considered during grade selection.

Q7:Can 1-5mm GPC Be Used in Foundry Production?

A7:Yes, it can be evaluated for carbon adjustment in gray iron and ductile iron melting. Foundries should consider the target iron chemistry, sulfur and nitrogen limits, addition method and available dissolution time before approving the grade.

Q8:What Packaging Options Are Available for 1-5mm GPC?

A8:The listed options include waterproof PP woven bags of 5 kg, 12.5 kg, 20 kg, 25 kg and 50 kg, as well as small bags packed into 1 MT jumbo bags. Confirm the required bag weight and additional moisture protection when requesting a quotation.

Q9:Can I Request a GPC Sample Before Bulk Purchasing?

A9:Sample arrangements can be discussed before bulk purchasing. The original product information indicates that sample material may be provided without charge while the buyer covers freight costs. Confirm sample availability, quantity and freight arrangements for the selected grade and particle size.

Q10:What Information Should I Provide for a 1-5mm GPC Quotation?

A10:Please provide your selected grade, fixed carbon requirement, sulfur and nitrogen limits, particle-size distribution, order quantity, packaging, destination port and preferred Incoterms. If you have specific COA or inspection requirements, include them in your inquiry.

 

Hot Tags: 1-5mm graphite petroleum coke, China 1-5mm graphite petroleum coke manufacturers, suppliers, factory, carbon raiser for drilling, carbon raiser for brazing, carbon raiser for soldering, carbon raiser for fastening, carbon raiser for bolting, carbon raiser for inventory management

Send Inquiry

Home

Phone

E-mail

Inquiry