High Level Material High Carbon Silicon
Products Description
In high-carbon silicon-manganese cast steel, in addition to common sulfide inclusions, there are also inclusions containing silicon, aluminum, calcium, and rare earth elements. By using processes such as high-temperature pouring of molten steel, argon blowing treatment, and post-argon blowing resting treatment, the inclusion content in high-carbon silicon-manganese cast steel can be significantly reduced, controlling the inclusion level to below 0.1%. After argon blowing treatment to remove inclusions, the toughness of high-carbon silicon-manganese cast steel is significantly improved, especially the impact toughness which increases by 21.2%, reaching 16.6 J/cm².
Products parameters
| Grade | Chemical Composition % | |||||
| Si C | Fe | Al | Ca | S | P | |
| >= | <= | |||||
| H-C Silicon 68% | 68 18 | 1.5 | 2 | 2 | 0.05 | 0.05 |
| H-C Silicon 65% | 65 18 | 1.5 | 2 | 2 | 0.05 | 0.05 |
Products cooperation picture

1.A method for determining phosphorus in high-carbon silicon-aluminum alloys using photometry includes control experiments and sample measurement tests. Control experiment: Equal concentrations of phosphorus standard solution with gradient volumes were pre-added to beakers containing a quantified amount of pure iron powder and a quantified amount of pure aluminum paste or pure aluminum powder. The test sample was dissolved using nitric acid-hydrofluoric acid, oxidized to orthophosphoric acid with perchloric acid, evaporated until hydrofluoric acid was dry, and then transferred to a high-type beaker. Nitric acid was immediately added, followed by sodium nitrite until the brown precipitate disappeared. The mixture was boiled for 10 seconds, molybdate and tartaric acid were added and shaken, iron fluoride was included, and tin chloride was used to reduce to phosphorus molybdenum blue. Water was used as a reference, and absorbance was measured at 680 nm in a spectrophotometer to establish a working curve or calculate a regression equation. Sample measurement test: After following the same experimental steps in a beaker as in the control experiment, absorbance was measured at 680 nm in a spectrophotometer, and phosphorus content was determined by comparing it with the working curve or regression equation from the control experiment.
Hot Tags: high level material high carbon silicon, China high level material high carbon silicon manufacturers, suppliers, factory
You Might Also Like
Send Inquiry








