Nov 29, 2023 Leave a message

What Are The Methods For Smelting Ferromolybdenum?

An indispensable raw material in steelmaking, molybdenum is added to cast iron to increase its strength and wear resistance.

China Ferromolybdenum manufacturers——ZhenAn

The raw material for smelting ferromolybdenum is mainly molybdenite (MoS2). Before smelting, the molybdenum concentrate is usually oxidized and roasted in a multi-hearth furnace to obtain roasted molybdenum ore with a sulfur content of less than 0.07%.

Ferromolybdenum smelting generally adopts the outside-furnace method. The furnace is a cylinder placed on a sand base, lined with clay bricks, and uses ferrosilicon containing 75% silicon and a small amount of aluminum particles as the reducing agent.

China Ferromolybdenum70 80 suppliers——ZhenAn New Material

After the charge is added into the furnace barrel at one time, it is smelted by the upper ignition method. Use initiator (saltpeter, aluminum chips or magnesium chips) on the material surface. After ignition, it will react violently, then calm, release slag, and remove the furnace barrel. The ferromolybdenum ingots are first cooled in the sand nest, and then sent to the cooling room to be flushed with water for cooling, crushing and finishing.

China Ferromolybdenum70 80 sales team——ZhenAn International

Send Inquiry

Home

Phone

E-mail

Inquiry