Feb 04, 2024 Leave a message

Titanium Alloy For Low Temperature

1) Ti-13V-11Cr-3A1 The ductility of this titanium alloy begins to decrease significantly below -100°C, so it can be used as a structural material at -100°C. At -100°C, its elongation is about 16%; its tensile strength is about 130 kg·force/mm².

Titanium alloy manufacturers
2) The elongation of Ti-6A1-4V (ELI), a titanium alloy with low interstitial elements, begins to decrease significantly at -200°C, so it can be used as a structural material for equipment used at -200°C. But at -200°C, the elongation of this alloy is only about 10%. This is something that must be noted when using this alloy at low temperatures.

Titanium alloy suppliers
3) Ti-5A1-2.5Sn (ELI), a titanium alloy with low interstitial elements, has no significant change in elongation below -250°C and remains at about 15%, while the tensile strength rises to 140 kg·force/mm² and above. In order to maintain the good low-temperature properties of this alloy, its interstitial element content must be strictly controlled. For example, the iron content should be controlled below 0.25%; the oxygen content should be below 0.12%; the content of other interstitial elements (hydrogen, nitrogen, carbon) should also be lower than that of ordinary alloys.

Titanium alloy factory
4) Industrial pure titanium (TA1, TA2) When the iron content of these two industrial pure titanium is 0.095%, the oxygen content is 0.08%; the hydrogen content is 0.0009%; and the nitrogen content is 0.0062%, the tensile strength at -269°C The strength is 65~80 kg·force/mm², which is approximately twice the tensile strength at room temperature. Its elongation drops from 50% to 40% at room temperature, but it still has high ductility. Therefore, these two types of industrial pure titanium can be used as low-temperature materials below -253°C.

Titanium alloy for sale

Send Inquiry

Home

Phone

E-mail

Inquiry