Products Description
Silica Refractory Bricks are refractory products with SiO2 content above 93%. Silica Refractory Bricks are made of silica with SiO2 content not less than 96%, adding mineralizing agent (such as iron scale, lime milk) and binding agent (such as sulfite pulp waste liquid), and then made by mixing, molding, drying, firing and other processes. The higher the SiO2 content in the silica raw material, the higher the refractoriness of the product. Impurities such as K2O and Na2O are harmful and will seriously reduce the refractoriness of refractory products.
Fe2O3, CaO, MgO and other impurities play the role of flux. The raw materials of high-grade silica bricks need special treatment to remove impurities.
Products Specifications
| Silica Refractory Bricks | |||||
| Item/Index | QG-0.8 | QG-1.0 | QG-1.1 | QG-1.15 | QG-1.2 |
| SiO2 % | ≥88 | ≥91 | ≥91 | ≥91 | ≥91 |
| Bulk Density g/cm3 | ≤0.85 | ≤1.00 | ≤1.10 | ≤1.15 | ≤1.20 |
| Cold Crushing Strength Mpa | ≥1.0 | ≥2.0 | ≥3.0 | ≥5.0 | ≥5.0 |
| 0.2Mpa Refractoriness Under Load T0.6℃ | ≥1400 | ≥1420 | ≥1460 | ≥1500 | ≥1520 |
| Permanent Linear Change On Reheating % 1450℃*2h | 0~+0.5 | 0~+0.5 | 0~+0.5 | 0~+0.5 | 0~+0.5 |
| 20~1000℃ Thermal Expansion 10~6/℃ | 1.3 | 1.3 | 1.3 | 1.3 | 1.3 |
| Thermal Conductivity (w/m*k) 350℃ | 0.55 | 0.55 | 0.6 | 0.65 | 0.7 |
The Application Of Silica Bricks
Silica Refractory Bricks are mainly used in the masonry of carbonization chamber, combustion chamber and partition wall of coke ovens (about 73% of the refractories used in a coke oven are silicon bricks), glass kilns and kiln roofs and walls, high temperature load-bearing parts of hot blast stoves, charcoal wax burners and other thermal kilns. In order to increase the production capacity of modern large-scale coke ovens, it is necessary to thin the charring chamber, combustion chamber and partition wall of the coke oven, which requires the use of high density and high thermal conductivity of silicon bricks.
Classification Of Silica Bricks
Silica Refractory Bricks of more varieties, according to the use of silicon bricks are divided into: coke ovens with silicon bricks, hot air furnace with silicon bricks, electric furnaces with silicon bricks, glass kilns with silicon bricks, and so on. According to the complexity of the brick type is divided into: standard brick, general type brick, shaped brick and special type brick.
Precautions For Using Silica Bricks
In the use of silicon bricks should pay attention to the following two points:
(1) silicon products at low temperatures due to changes in the crystalline form of the residual quartz, the volume change is large, so the oven in the 600 ℃ below the temperature is not straight too fast, in the cold to 600 ℃ to cool slowly, so as to avoid cracks;
(2) as far as possible, do not contact with the alkaline slag.
In the production process of silica bricks, it is suitable to use a variety of ingredients and multilevel ingredients to moderate the harm caused by the volume expansion of the products during firing, to ensure a reasonable packing density of mud, and to further improve the bulk density of the bricks.
In order to make silicon bricks with high compressive strength, in addition to special shapes and production of fewer bricks, should be used as far as possible mechanical molding method.

If you are interested refractory bricks, contact us now!
Email: info@zaferroalloy.com Whatsapp: 8615896822096








