Apr 29, 2023 Leave a message

Intermediate Package Insulation Board

There are generally three types of insulating plates for tundish: siliceous, magnesium and magnesium olivine.
(1) The application characteristics of various insulation boards are as follows:
1) Silicon insulation panels are generally used for pouring ordinary carbon steel, carbon structural steel, and ordinary low alloy steel. It undergoes phase transformation of quartz during use, resulting in volume expansion and densification of the reaction layer in contact with the slag, thereby preventing the infiltration of the slag and forming a high viscosity glass phase on the surface, further preventing the penetration of the slag.
2) Magnesium insulation board can be used for casting high-quality steel grades such as aluminum killed steel, low alloy steel, and carbon structural steel. During use, it has stable high-temperature performance, good resistance to alkaline slag corrosion, and can absorb FeO in the slag to form magnesium ferrite, resulting in volume expansion. It forms a dense structure on the surface of the insulation board, reducing further penetration of the slag. In addition, the phosphate in the magnesium insulation board with inorganic binder forms a high-temperature stable phase with the impurity CaO at high temperatures, which has good resistance to steel liquid erosion.
3) The magnesium olivine insulation plate is mainly used for high-quality alloy steel grades. During use, the high-temperature performance is good, and the temperature change during the pouring process is small because inorganic binders are used, eliminating the phenomenon of "silicon and hydrogen increase" in steel liquid.
(2) The advantages of using tundish insulation panels are as follows:
1) The tundish can be baked without preheating, achieving cold ladle pouring and saving baking fuel;
2) Good insulation performance can reduce the tapping temperature of the steelmaking furnace by 5-10 ℃, and the tundish is not easy to form cold steel;
3) The lifespan of the permanent layer of the tundish is extended, greatly reducing the consumption of refractory materials;
4) The inner lining of the insulation board is easy to disassemble and lay, saving 70% of labor compared to refractory clay brick masonry, and improving labor conditions;
5) Compared to refractory brick lining, it is greater than 50 in the casting billet μ The inclusion content of m is significantly reduced.
(3) The disadvantages of the insulation board for the tundish are as follows:
1) When siliceous insulation panels are applied to aluminum killed steel and low aluminum killed steel, alloy elements such as AI and Mn in the molten steel will react with the refractory material to form, resulting in an increase in the content of oxide inclusions in the casting billet and affecting the quality of the steel;
2) In multi furnace continuous casting, the strength of magnesium insulation board is not ideal. When using magnesium insulation board with organic binder, the organic binder will decompose into hydrogen during use and enter the steel water, causing the steel to produce "hydrogen embrittlement";
3) Due to the high thermal conductivity of the magnesium insulation board, the temperature of the molten steel inside the tundish changes significantly, and additional insulation materials must be added to the side walls of the tundish, which increases the complexity of construction;
4) Under the action of high temperature, the bonding phase formed by magnesium insulation board is easy to react with the slag to form low melting substances, which will accelerate the penetration of the slag and reduce its service life;
5) The main crystal phase in the forsterite insulation plate is forsterite, which can easily react with the slag to form low melting materials such as calcium magnesium olivine (CMS) during use, resulting in damage to the insulation plate structure and reduced service life.

Send Inquiry

Home

Phone

E-mail

Inquiry