Optoelectronic tungsten wire is mainly used in optical communications, lasers, optoelectronic displays, optics, solar photovoltaics, electronic engineering, logistics networks and other fields due to tungsten's high melting point, high hardness, and non-corrosive properties. Tungsten wire is generally drawn from various drawing dies. The main use is to manufacture filaments and high-speed cutting alloy steel, and is also used in optical instruments, chemical instruments, etc.

Based on optoelectronics, it is a technical discipline that comprehensively utilizes optics, precision machinery, electronics and computer technology to solve various engineering application issues. The information carrier is expanding from the electromagnetic band to the optical band, so that optoelectronic science and optomechatronics technology are concentrated in the optoelectronic information industry such as optical information acquisition, transmission, processing, recording, storage, display and sensing. The information carrier is expanding from the electromagnetic band to the optical band, so that optoelectronic science and optomechatronics technology are concentrated in the optoelectronic information industry such as optical information acquisition, transmission, processing, recording, storage, display and sensing.

The resistivity of photoelectric tungsten wire is 5.3*10. Tungsten has a high melting point, high resistivity, good strength and low vapor pressure. It is the best material among all pure metals for making incandescent lamp tungsten wire. Most of the production of photoelectric tungsten wire uses ammonium paratungstate (APT) as raw material. The general process is to bake ammonium paratungstate into tungsten trioxide in air at about 500°C, or slightly reduce it into blue tungsten oxide in hydrogen at about 450°C. When the diameter of the tungsten wire reaches the micron level, it is difficult to accurately measure its diameter using conventional calipers. Therefore, internationally, the thickness of tungsten wire with a diameter of less than 0.2mm is usually expressed by the weight of the wire segment cut into a length of 200mm.









