Microsilica powder, also known as silicon powder or concentrated silicon powder, is a ferroalloy that is rapidly oxidized, condensed, and precipitated by highly volatile silica and silicon gas in the submerged arc furnace when smelting ferrosilicon and industrial silicon (metallic silicon). Become. It is a by-product of large-scale industrial smelting. The entire process needs to be recycled through dust removal and environmental protection equipment. Due to its low density, it also needs to be encrypted through encryption equipment.

ZhenAn consider the following precautions when using microsilica powder:
1. Used for refractory materials; according to the different properties of refractory raw materials, orthogonal design is carried out, and the appropriate formula is selected through comparative experiments. Unencrypted silica fume is often used as a refractory material.
2. Applied to the mix design of high-performance concrete;

1) Compatibility: High-purity silica fume manufacturers believe that microsilica fume has good compatibility with water-reducing agents, fly ash, mineral powder, fibers, etc.
2) Slump: Due to its caulking effect, the viscosity of concrete is higher, so the slump design requirement of silica fume-mixed concrete is 2 ~ 3cm higher than that of ordinary concrete;
3) The dosage is 6-12% of the cement, used to make high-strength shotcrete; for underwater engineering concrete, its content is slightly higher; however, high-purity silica fume manufacturers believe that when microsilica fume is used as a pumping aid , the doping amount is reduced to about 2%. Determine the mix ratio through a mix ratio test. Microsilica fume, cement and aggregate should be mixed at the same time, construction should be carried out in strict accordance with specifications, and maintenance should be strengthened.









