The following points should be noted when choosing the relevant equipment for smelting high carbon ferromanganese.
Self-baking electrode:The quality of high carbon ferromanganese self-baking electrode depends on the preparation of electrode shell, electrode paste and electrode roasting. When the quality of these three aspects can not be guaranteed, a variety of electrode accidents will occur, such as electrode undercooking, leakage of paste, hard breaks, soft breaks and so on. Light is to reduce the load, heavy is to cause thermal stopping pile. It not only affects the high carbon ferromanganese smelting time and production operation speed, but also reduces the bottom temperature of the furnace.
Furnace lining: high carbon ferromanganese furnace lining is an important part of the furnace body, because it has to withstand the high temperature of 1400 ~ 1800 degrees Celsius in the process of use, but also bear the burden of erosion, high-temperature furnace gas and iron and slag physical and chemical erosion, so it is easy to be melted, softened, melted and even cracked. If the adiabatic performance is not good, but also increase power consumption. Therefore, the furnace lining should use special refractory materials and insulation materials.
Water-cooling equipment: high-carbon ferromanganese electrode water-cooling system is very important to work properly. Electrode sleeve, copper tile and conductive copper pipe are cooled by water. The inlet temperature of the cooling water should be as low as possible and the outlet temperature should not be too high. The quality of cooling water in the smelter is very hard, and the sediments in the water are easy to be deposited at the bottom of the big cover, which seriously affects the cooling effect of the big cover. Spare parts management should be strengthened to shorten the hot stop time.
We can send samples free of charge.
We can customize the products according to your size, shape and other requirements.
If you would like to know the price or other information, please contact us.
We have 30 years of experience in the field of metallurgy.
