Jan 13, 2025 Leave a message

Ferro silicon nitride contains impurities.

Ferrosilicon nitride is produced in different ways. The ferrosilicon itself contains impurities, and different binders are added during production, which also introduce impurities. Resin is usually used as a binder. When using resin as a binder, the amount of carbon and sulfur left behind is usually quite high. When other binders are used, the total amount of impurities introduced is usually controlled within 1%.

 

In the production process of ferrosilicon nitride, ferrosilicon is used as a reference weight to obtain products containing 30% nitrogen with a total weight of 50% (i.e.: 30% nitrogen + 2.5% oxygen + 1% binder residue). The estimated content of aluminium and calcium is 1.33% and 1%, respectively.

 

The standard allows for a maximum of 1.5% aluminium and 1% calcium. The production process of ferrosilicon nitride involves high temperatures and does not include moisture. When finished products are being packaged, the products must be sealed and packaged to stop moisture from the air getting on them, because ferrosilicon nitride powder is often used in refractory materials that have nothing to do with water. The standard says that the water content must be less than 0.1%.
 

Send Inquiry

Home

Phone

E-mail

Inquiry