Electrolytic Manganese Flakes HS Code: 81110010 vs 81110030

Quick Answer

For electrolytic manganese metal flakes, the correct customs code depends on the destination country and the tariff system used.

At the international HS level, manganese and articles thereof fall under heading 8111.00. Individual countries then add their own tariff subdivisions.

For shipments into India, HS code 81110010 covers unwrought manganese and manganese base alloys and is commonly used for unwrought 99.7% electrolytic manganese metal flakes. HS code 81110030, by comparison, covers wrought manganese and should not be treated as an interchangeable code for ordinary unwrought EMM flakes.

For imports into the United States, electrolytic manganese flakes containing at least 99.5% manganese fall under HTSUS 8111.00.4700. A U.S. customs classification ruling has also applied this code to electrolytic manganese flake with 99.7% minimum Mn.

Before shipment, confirm the final tariff code against the destination country's current customs schedule and the actual product composition and form.

If you also need to confirm the material specification before preparing customs documents, review our 99.7% electrolytic manganese flakes for Mn content, impurity limits, flake form, size and supply information.

HS Code 81110010 for Electrolytic Manganese Metal Flakes

In India, tariff item 81110010 covers:

Unwrought manganese and manganese base alloys.

This classification is relevant to standard electrolytic manganese flakes supplied as unwrought manganese metal.

Recent trade records also show shipments described as electrolytic manganese metal flakes, manganese metal flakes, and unwrought unalloyed electrolytic manganese metal flakes 99.7% min under 81110010.

For a conventional 99.7% EMM flake shipment to India, 81110010 therefore has a much stronger classification basis than 81110030 when the material remains unwrought.

HS Code 81110030 for Manganese Metal

Under the Indian tariff schedule, 81110030 means wrought manganese. It is not simply another code for the same unwrought electrolytic manganese flakes covered by 81110010.

The distinction is based mainly on the processing condition of the manganese product.

If your material is supplied directly as brittle electrolytic flakes without further working into a wrought manganese article, do not select 81110030 only because you find the code attached to a manganese-related shipment in a trade database.

Why EMM Flakes Import Records Show 81110010 and 81110030

Trade databases can contain different manganese descriptions under nearby tariff items because the underlying products may not be identical.

You may see:

• electrolytic manganese flakes;
• manganese briquettes;
• wrought manganese products;
• unwrought manganese;
• manganese alloys;
• processed manganese articles.

Some shipment records show manganese metal briquettes under 81110030, while other briquette and flake records appear under 81110010. A shipment record alone does not establish the legal classification for every product with a similar commercial name.

When you compare 81110010 vs 81110030, first determine whether the product is legally treated as unwrought or wrought manganese under the destination tariff schedule.

International HS Code for Electrolytic Manganese Metal

At the harmonized level, manganese falls under heading:

8111.00 - Manganese and articles thereof, including waste and scrap.

This six-digit level does not provide the same detailed distinction used by every national tariff system.

National Tariff Codes for EMM Flakes

After the harmonized level, each country can create additional tariff digits.

India uses classifications including:

• 81110010 - unwrought manganese and manganese base alloys;
• 81110020 - waste and scrap of manganese base alloys;
• 81110030 - wrought manganese;
• 81110090 - other.

The United States uses a different structure and separates high-purity manganese flakes from other unwrought forms.

Why Manganese Metal Flakes HS Codes Differ by Country

The first six digits provide the international classification framework. Extra national digits are designed for local tariff, statistical and customs requirements.

As a result, your commercial invoice may describe the same product as:

Electrolytic Manganese Metal Flakes, Mn 99.7% Min

while the full customs code changes when the destination changes from India to the United States or another country.

Do not copy a full eight- or ten-digit tariff code from one market into documentation for another market without verification.

HTSUS 8111.00.4700 for 99.7% Electrolytic Manganese Flakes

For the United States, HTSUS 8111.00.4700 covers:

unwrought manganese, flake containing at least 99.5% manganese by weight.

A 99.7% electrolytic manganese flake therefore meets the stated manganese-content threshold, provided the product also meets the relevant form and processing conditions.

A U.S. customs ruling classified electrolytic manganese flake with:

• Mn 99.7% minimum;
• sulfur 0.05%;
• carbon 0.04%;
• phosphorus 0.005%;
• Fe + Se + Si 0.205% maximum;
• under 8111.00.4700.

This gives a strong reference point when you search for an electrolytic manganese flakes HTS code USA.

U.S. Customs Classification for EMM Flakes

For U.S. entry, provide enough information to establish both product form and manganese content.

Your documentation should clearly state, where accurate:

Electrolytic Manganese Metal Flakes - Unwrought - Mn 99.7% Min

The COA should support the manganese purity shown in the commercial description.

HS Code vs HTS Code for Manganese Metal Flakes

HS and HTS are related but are not identical terms.

HS refers to the international Harmonized System.

HTSUS refers to the Harmonized Tariff Schedule of the United States.

For manganese metal flakes:

• international level: 8111.00;
• U.S. tariff subdivision: 8111.00.4700 for qualifying high-purity unwrought flakes.

So an EMM flakes HS code search and an EMM flakes HTS code search can produce different code lengths without creating a contradiction.

99.7% EMM Flakes and Customs Classification

Purity can matter, but its effect depends on the national tariff structure.

In the United States, the 99.5% manganese threshold is written directly into the subdivision for unwrought manganese flakes. A 99.7% EMM flake falls above that threshold.

If you are comparing standard Mn99.70 material with a higher-purity specification, review our Mn99.70 vs Mn99.95 EMM flakes comparison for the differences in Mn content, impurity control and application requirements.

In India, 81110010 is defined primarily around unwrought manganese and manganese base alloys, rather than a separate 99.5% or 99.7% purity threshold in the tariff-item description.

Manganese Purity and HS/HTS Classification

Do not use purity alone to determine the code.

Check together:

• manganese content;
• alloyed or unalloyed condition;
• unwrought or wrought condition;
• flake, powder, briquette or other form;
• destination country.

A 99.7% manganese flake and a 99.7% manganese powder can share the same chemical purity while entering different national tariff subdivisions because the physical form is different.

HS Code for Electrolytic Manganese Metal Flakes

At the international level, electrolytic manganese flakes remain within heading 8111.00.

For the United States, qualifying flake containing at least 99.5% manganese is classified under 8111.00.4700.

HS Code for Electrolytic Manganese Metal Powder

Powder requires separate attention.

Under the U.S. tariff structure, powder containing at least 99.5% manganese appears under 8111.00.4910, while high-purity flake is listed separately under 8111.00.4700.

India's 81110010 classification is broader and covers unwrought manganese and manganese base alloys.

Can Flake or Powder Form Affect Manganese Customs Classification?

Yes.

Physical form can directly affect the national tariff subdivision.

If you change from EMM flakes to manganese metal powder, do not automatically keep the same full U.S. HTS code.

Confirm:

composition + purity + form + processing condition + destination tariff schedule.

HS Code for Electrolytic Manganese Metal

Electrolytic manganese metal belongs to heading 8111, covering manganese and articles thereof.

Typical EMM flakes are essentially manganese metal rather than a ferroalloy containing substantial iron and silicon.

HS Code for Silicomanganese

Silicomanganese belongs to a different tariff family.

At the harmonized level, silicomanganese is associated with HS 7202.30 rather than heading 8111.

Why EMM Flakes Are Different from Silicomanganese

The chemical nature of the material is different.

Electrolytic manganese metal is a high-manganese metallic product.

Silicomanganese is a ferroalloy containing manganese, silicon and iron.

If your commercial description says:

Electrolytic Manganese Metal Flakes, Mn 99.7% Min

using a silicomanganese HS code would not reflect the same material.

Always match the tariff classification to the actual composition shown on your COA.

EMM Flake Purity and Chemical Composition

Start with the actual chemical composition.

For a common Mn 99.7 EMM specification, your COA may include:

• Mn;
• C;
• S;
• P;
• Si;
• Fe;
• Se.

Purity is especially important where a national tariff subdivision includes a minimum manganese percentage.

Electrolytic Manganese Product Form and Processing Condition

State whether you supply:

• flakes;
• powder;
• briquettes;
• lumps;
• other processed forms.

Also confirm whether the material remains unwrought or has undergone further working.

This distinction is particularly important when you compare India's 81110010 and 81110030.

Destination Country and Manganese Tariff Code

A full national customs code should always be checked against the destination country.

India: 81110010 for unwrought manganese and manganese base alloys.

United States: 8111.00.4700 for qualifying manganese flakes containing at least 99.5% Mn.

Do not treat either code as a universal eight- or ten-digit EMM import code.

COA and Product Description for HS Code Verification

Keep the commercial description consistent with your COA.

If your batch is Mn 99.7% min in flake form, state that clearly rather than using only a vague description such as:

Manganese Material

A more useful description is:

Electrolytic Manganese Metal Flakes, Unwrought and Unalloyed, Mn 99.7% Min

Add the actual specification and packing information where required.

For additional composition, packing and product-form details, you can review our electrolytic manganese flake specifications. The description used in your customs documents should remain consistent with the actual supplied batch and COA.

Electrolytic Manganese Metal Flakes Product Description

A customs description should identify what the material actually is.

For a standard shipment, you can use a format such as:

Electrolytic Manganese Metal Flakes, Unwrought and Unalloyed, Mn 99.7% Min

Only use this wording when it accurately matches the supplied material.

99.7% EMM Flakes Description on Commercial Invoice

A more detailed commercial invoice description can include:

Electrolytic Manganese Metal Flakes, Mn 99.7% Min, Flake Form, Unwrought, Net Weight: XX MT

You can then provide the applicable tariff code according to the destination market.

For India, unwrought manganese is generally associated with 81110010. For the United States, qualifying 99.7% flake falls within HTSUS 8111.00.4700.

COA and Packing List Information for Manganese Metal Flakes

Keep the main product identity consistent across:

• commercial invoice;
• packing list;
• COA;
• contract;
• bill of lading description;
• customs declaration.

Useful details include product name, Mn purity, physical form, net weight, packing type and batch information.

If your contract requires a specific customs description, confirm it before shipment rather than changing the product wording after the documents have already been issued.

HS classification determines how your material is declared, while the actual purchasing cost also changes with EMM market conditions, quantity, packing and shipment terms. If you are preparing a new order, you can review our electrolytic manganese metal price update before requesting a current quotation.

Customs classification can change by destination, product form and current tariff rules. Before shipment, confirm the final HS/HTS code with the applicable customs tariff or your customs broker using the actual COA and product description.

We supply electrolytic manganese metal flakes for metallurgical, alloy and industrial applications. If you are preparing an order, send us your required Mn purity, impurity limits, quantity, packing method, destination port and delivery term.

We can confirm the available specification, batch COA, packing and export quotation according to your requirements. You can also review our 99.7% EMM flake specification before sending your inquiry.

View 99.7% EMM Flakes Request an EMM Quote