TC4 titanium alloy Ti-6Al-4V is the earliest and most widely developed titanium alloy in the world. Its output accounts for more than half of the total output of various titanium alloy semi-finished products in the world, and more than 80% in the aerospace industry. Al improves the room temperature strength and thermal strength properties of the alloy by solid solution strengthening the α phase, while V both increases strength and improves plasticity. V can also inhibit the formation of α2 superstructure phase and avoid alloy embrittlement during long-term use.

The main features of TC4 titanium alloy are excellent comprehensive properties and good process characteristics. It also has excellent superplasticity and is suitable for forming using various pressure processing methods and welding in various ways.
The main semi-finished products of TC4 titanium alloy are bars, forgings, thin plates, thick plates, profiles and wires. This alloy is mainly used in the annealed state, and can also be solid-solution age-strengthened. However, the hardened cross-section does not exceed 25 to 30 mm, and solid-solution aging strengthening is not suitable for thick and large workpieces. Currently, many modifications of Ti-6Al-4V titanium alloys have appeared in various countries for different use conditions and process requirements. The main differences are different Al and V contents and lower interstitial element impurity contents, as well as the addition of trace amounts. Ru's Ti-6Al-4V alloy.

TC4 titanium alloy is mainly used in aerospace to manufacture various beams, bulkheads, slide rails, and landing gear beams in aircraft structures, fan and compressor disks and blades of aeroengines, casings, pressure vessels of space rockets, and various types of fasteners. Replacing 30CrMnSiA structural steel with TC4 titanium alloy can reduce the weight of parts by about 30%.
TC4 titanium alloy has also been widely used in the civilian industry. For example, gas turbine blades in the electric power industry, ship propellers in the shipbuilding industry, offshore oil field drilling platforms in marine engineering, various corrosion-resistant pumps in the chemical industry, artificial implants in medicine, various sports equipment, etc.









