Mg10Si60 Ferro Silicon Magnesium Alloy For Aluminum Alloy Modification

Mg10Si60 Ferro Silicon Magnesium Alloy is a Mg-Si based alloy used for aluminum alloy modification, magnesium-silicon addition and composition adjustment. With a typical composition of Mg around 10% and Si around 60%, this alloy can be checked when your production needs both magnesium and silicon input in one metallurgical addition material.

You may need Mg10Si60 when your aluminum alloy formula requires Mg and Si adjustment during melting, batching or alloy preparation. Compared with adding separate magnesium and silicon materials, Mg10Si60 can help your team manage a combined Mg-Si source, but the actual benefit depends on whether the Mg/Si ratio matches your alloy formula.

We supply Mg10Si60 ferro silicon magnesium alloy in lump or granule form according to your feeding method. Before shipment, we help you confirm Mg, Si, Ca, Al, Fe, particle size, fines condition, packing method, COA, MSDS, shipping marks and loading details. If your aluminum alloy plant has a fixed internal standard, you can send us your required Mg/Si ratio, impurity limits, size range and destination port before quotation.

Get A Quote Now

We once received a technical inquiry from an aluminum alloy casting manufacturer. Rather than prioritizing low unit price, their core demand was to stabilize molten alloy composition during die-casting production.

In their original production flow, they added silicon raw materials independently, while magnesium element was hard to keep steady among different batches, which easily caused unqualified mechanical properties of finished castings.

We did not start with quotation directly. We firstly verified that our standard Mg10Si60 grade with roughly 10% magnesium and 60% silicon could match their preset alloy element proportion range.

Their technical team put forward clear physical index requirements: fixed lump particle size within stable range, strictly control fine powder content. Excessive fines would lead to uneven mixing in batching workshop, cause weighing deviation and further affect final alloy hardness and fluidity.

Later we confirmed applicable feeding proportion and charging temperature range according to their furnace condition, and provided full chemical inspection certificate covering Mg, Si, Ca, trace Al and residual iron content for batch verification.

This real service case fully explains the core selection principle of Mg10Si60 ferro silicon magnesium alloy. Only when its fixed Mg-Si ratio, physical specification and impurity level are highly matched with your actual smelting process and finished product standard, can it achieve ideal aluminum alloy modification effect.

Get A Customized Solution

We supply Mg10Si60 ferro silicon magnesium alloy with export packing according to your order requirement. Standard packing is usually 1MT jumbo bag. Small bags inside jumbo bags, pallet packing or customized shipping marks can also be arranged.

For long-distance export shipments, we can help your team check packing condition, shipping marks and loading details before dispatch.

ZHEN AN INTERNATIONAL CO., LIMITED supplies metallurgical alloys and raw materials for aluminum alloy, steelmaking, foundry and export industrial applications. For Mg10Si60 ferro silicon magnesium alloy, we focus on the details that affect real aluminum alloy production, including Mg/Si ratio, particle size, impurity limits, COA and packing condition.

In our export shipments, we usually confirm chemical composition, size condition, packing photos, shipping marks and documents before dispatch. If your aluminum alloy plant needs Mg-Si alloy material for modification or composition adjustment, the first step is to check whether the grade fits your formula, not only whether the product name looks correct.

Q: What is Mg10Si60 ferro silicon magnesium alloy used for?
A: Mg10Si60 ferro silicon magnesium alloy is used for aluminum alloy modification, Mg-Si addition and composition adjustment when your process needs both magnesium and silicon input.

Q: What does Mg10Si60 mean?
A: Mg10Si60 usually refers to an alloy direction with Mg around 10% and Si around 60%. Actual batch values should be confirmed by COA before shipment.

Q: Is Mg10Si60 better than adding pure magnesium separately?
A: Not always. Mg10Si60 is useful when your formula needs Mg and Si together. If your process only needs Mg without extra Si input, pure magnesium or another Mg source may be more suitable.

Q: What size can you supply?
A: Common sizes include 5–25mm, 10–30mm and 10–50mm. Custom size can be discussed according to your feeding method and order quantity.

Hot Tags: mg10si60 ferro silicon magnesium alloy for aluminum alloy modification, China mg10si60 ferro silicon magnesium alloy for aluminum alloy modification manufacturers, suppliers, factory