Black Silicon Carbide Powder
silicon carbide powder 600 grit supplier
600 Grit Black Silicon Carbide supplier
36 Grit Black Silicon Carbide supplier

Black Silicon Carbide Powder

Black Silicon Carbide Powder used in steelmaking also have a very good promotion effect on the completion of the smelting process. It not only has a good deoxidation effect, but also helps reduce smelting time and improve the quality of steel products.

Send Inquiry

Product Introduction

silicon carbide powder 600 grit Description

In addition to being used as abrasives, it has many uses. It can be made into refractory materials, resistant to thermal shock, small in size, relatively light in weight, high in strength, and has good energy-saving effects. Due to its low natural content, silicon carbide is mainly man-made.

A common method is to mix quartz sand and coke, then use the silica and petroleum coke, add edible salt and sawdust, put it in an electric furnace, heat it to about 2,000 degrees Celsius, and obtain silicon carbide powder after a process. It is a relatively new type of composite deoxidizer that is often used in many smelting processes. Its high temperature resistance and thermal conductivity make it one of the kiln furniture materials for tunnel kilns or shuttle kilns. Its electrical conductivity makes it It has become an important electric heating element. It can be seen that its uses are relatively wide. The chemical properties of silicon carbide materials are relatively stable, and at the same time, the thermal conductivity is high and it has good wear resistance. In addition to using this material as an abrasive in industry, silicon carbide powder is also coated on the inner wall of the turbine impeller or cylinder block using a special process, which can improve its wear resistance and extend its service life by 1 to 2 times; silicon carbide is very suitable as a The raw materials of bearings or high-temperature furnaces will not melt under a variety of pressures that can be achieved.

600 Grit Black Silicon Carbide Specification

Grits	Bulk Density g/cm³	High Density g/cm³	Grits	Bulk Density g/cm³	High Density g/cm³
F16 ~ F24	1.42~1.50	≥1.50	F100	1.36~1.45	≥1.45
F30 ~ F40	1.42~1.50	≥1.50	F120	1.34~1.43	≥1.43
F46 ~ F54	1.43~1.51	≥1.51	F150	1.32~1.41	≥1.41
F60 ~ F70	1.40~1.48	≥1.48	F180	1.31~1.40	≥1.40
F80	1.38~1.46	≥1.46	F220	1.31~1.40	≥1.40
F90	1.38~1.45	≥1.45

36 Grit Black Silicon Carbide supplier

220 Grit Black Silicon Carbide Powder supplier

Black Silicon Carbide Powder 180 Grit Customer visit photos

FAQ

Q: How long is the delivery time?

A: The delivery time will be determined according to the quantity of the order.

Q:.What's the MOQ?

A: The MOQ varies for different products. Please contact us to understand.

Q: How do you guarantee quality?

A: Always a pre-production sample before mass production; Always final Inspection before shipment.

Q:Can you provide samples for free?

A:Yes, we can supply samples for free, and the freight will be undertaken by clients. we can provide free samples to customers for them to check the quality or do the chemical analyses, but please tell us the detailed requirements for us to prepare the right samples.

Hot Tags: black silicon carbide powder, China black silicon carbide powder manufacturers, suppliers, factory, Solid SiC, Carborundum Grain, Green Carborundum, Silicon Carbide 100 Grit manufacturer, Green Silicon Carbide 1200 Grit, Carborundum Powder

180 Grit Silicon Carbide

Silicon Carbide 100 Grit