99.7% Electrolytic Manganese Metal Flakes | EMM
video

99.7% Electrolytic Manganese Metal Flakes | EMM

Mn99.7 electrolytic manganese metal flakes with Mn ≥99.70%, controlled C, S, P, Fe, Si and Se, 1–2 mm flake form, COA and SGS/BV inspection support.
Send Inquiry
Product Introduction

Quick Answer: 99.7% Electrolytic Manganese Metal Flakes

 

99.7% Electrolytic Manganese Metal Flakes, also written as Mn99.70 or EMM 99.7, are metallic manganese flakes with Mn ≥99.70% and controlled C, S, P, Fe, Si and Se.

This grade is suited to industrial applications that need a relatively clean manganese source but do not require the higher Mn minimum of Mn99.8 or Mn99.9.

Our current Mn99.7 reference specification also includes 1–2 mm flake thickness, 1 MT jumbo bag packing and batch COA availability. SGS or BV inspection can be arranged when required before shipment.

For an actual order, send us your required Mn and impurity limits, quantity, packing, destination port and inspection requirements.

You can also compare Mn99.8 electrolytic manganese flake, Mn99.9 electrolytic manganese flake and our complete electrolytic manganese metal range.

What Does Mn99.7 Mean?

 

Mn99.7 means the manganese content is specified at 99.70% minimum. However, the grade should not be evaluated from Mn content alone.

For industrial use, you should also check the maximum limits for carbon, sulfur, phosphorus, iron, silicon and selenium because these elements can affect whether the material fits your own production specification.

The useful purchasing question is therefore not simply:

"Is this 99.7% manganese?"

It is:

"Does this Mn99.7 batch meet all of the chemistry limits required by my process?"

Mn99.7 Electrolytic Manganese Specification

 

Item Reference Specification
Grade Mn99.70
Mn ≥99.70%
C ≤0.04%
S ≤0.05%
P ≤0.005%
Fe ≤0.03%
Si ≤0.010%
Se ≤0.10%
Appearance Silver-gray metallic flakes
Flake Thickness 1–2 mm
Packing 1 MT jumbo bags
MOQ 1 MT
Quality Document COA available

If your specification uses tighter limits, send the exact Mn, C, S, P, Fe, Si and Se requirements before quotation. The final supplied material should be checked against the agreed specification and applicable batch COA.

Mn99.7 vs Mn99.8 vs Mn99.9

 

The three grades should be treated as separate specification options rather than interchangeable product names.

Grade Minimum Mn When to Consider It
Mn99.7 ≥99.70% Standard industrial EMM grade where Mn99.70 and the applicable impurity limits meet your requirement.
Mn99.8 ≥99.80% Use when your specification requires a higher Mn minimum than Mn99.7.
Mn99.9 ≥99.90% Use when your specification requires Mn99.9 chemistry and tighter impurity control.

Before changing grades, compare the complete chemistry and your actual production requirement. The manganese percentage alone is not enough to determine which grade you need.

Impurity Control in Mn99.7 EMM Flakes

 

Carbon and Sulfur

The current Mn99.7 reference limits are C ≤0.04% and S ≤0.05%. If your steel, alloy or downstream material has tighter limits, include those maximum values directly in the RFQ.

Phosphorus

P is currently limited to ≤0.005%. This should be checked against your own acceptance specification rather than assumed from the Mn99.7 grade name.

Iron and Silicon

The current reference lists Fe ≤0.03% and Si ≤0.010%. If your process is sensitive to additional iron or silicon input, compare these values with the batch COA before use.

Selenium

Se is included as a separate controlled item in the current Mn99.7 specification at ≤0.10%.

If selenium is restricted in your downstream route, include the required Se maximum in your purchase specification and verify the applicable batch result.

Why Mn99.7 Is Supplied in Flake Form

 

Electrolytic manganese metal is supplied as brittle metallic flakes rather than large ferroalloy lumps.

The current product specification uses approximately 1–2 mm flake thickness.

Handling and Weighing

Flake form can be stored, weighed and introduced into the process as a defined metallic manganese material without handling it as fine powder.

Particle Condition

If your process requires a defined flake-size distribution, maximum fines content or another physical tolerance, state that requirement before order confirmation.

Receiving Inspection

When the material arrives, check the bag condition, batch identification, visible flake condition and applicable quality documents against the purchase specification.

Industrial Uses of Mn99.7 Electrolytic Manganese Flakes

 

Steel and Alloy Production

Mn99.7 can be used as a metallic manganese source when your melt requires manganese addition with controlled C, S, P, Fe and Si input.

The required addition amount should be calculated from your starting chemistry and target manganese level.

Stainless Steel

Electrolytic manganese can be used in manganese-bearing stainless steel routes, including applications where additional iron or silicon input needs to remain controlled.

For 200-series stainless steel production, confirm the complete Mn99.7 chemistry against your own grade specification before ordering.

Non-Ferrous Alloy Production

Mn99.7 may also be used as a manganese source in selected aluminum, copper and other non-ferrous alloy systems where metallic manganese is required.

Manganese Chemicals

EMM flakes can be used as metallic manganese feedstock for downstream manganese compounds and chemical conversion processes.

Battery-Related Manganese Materials

If Mn99.7 is considered as feedstock for a battery-related manganese process, confirm the applicable Fe, S, P, C, Si and Se limits first. The grade name alone does not establish suitability for every battery-material route.

Mn99.7 Batch COA and Acceptance

 

A batch COA provides the most useful connection between the grade you ordered and the chemistry of the material supplied.

For Mn99.7 orders, COA can be provided with the applicable chemistry results. SGS or BV inspection can also be arranged when required.

Acceptance Check What to Verify
Grade Mn99.70 / 99.7% EMM
Mn Check the minimum against the purchase specification.
Impurities Review C, S, P, Fe, Si and Se individually.
Batch Identification Match the supplied material with the applicable COA.
Third-Party Inspection Confirm inspection organization and scope before shipment if required.

99.7% EMM Price and Quotation Basis

 

Electrolytic manganese metal prices change with manganese market conditions, order quantity, packing, inspection requirements, trade terms and destination.

For a comparable quotation, send the same commercial basis to each supplier.

Quote Item What to Provide
Grade Mn99.70 / 99.7% EMM flakes
Quantity Required metric tons
Packing 1 MT jumbo bags or confirmed alternative
Destination Destination port
Trade Term FOB / CFR / CIF or agreed term
Inspection COA / SGS / BV requirement

Request Current Mn99.7 Price

Mn99.7 Supply and Quality Support

 

For Mn99.7 orders, we work from the confirmed chemistry, flake form, quantity, packing, destination and inspection requirements rather than treating all electrolytic manganese grades as the same material.

  • 150,000+ MT annual production and sales across our core metallurgical material range.
  • Batch COA support for chemistry confirmation.
  • SGS or BV inspection can be arranged when required.
  • 1 MT jumbo-bag packing for current Mn99.7 supply.
  • Export supply experience across 100+ countries and regions.

ZhenAn electrolytic manganese metal supply

Mn99.7 electrolytic manganese flake specification discussion
Mn99.7 Electrolytic Manganese Specification Discussion
Mn99.7 electrolytic manganese quality and project review
Mn99.7 Quality and Project Review

Quality and Qualification Documents

 

 
ZhenAn CE qualification document

CE

ZhenAn ISO 9001 qualification document

ISO9001

ZhenAn ISO 14001 qualification document

ISO14001

ZhenAn ISO 45001 qualification document

ISO45001

ZhenAn SGS qualification document

SGS

ZhenAn metallurgical material factory

ZhenAn electrolytic manganese and metallurgical materials

ZhenAn metallurgical material shipping and transportation

What to Include in a Mn99.7 EMM RFQ

 

  • Grade: Mn99.70 / EMM 99.7%.
  • Chemistry: required Mn, C, S, P, Fe, Si and Se limits.
  • Flake Requirement: 1–2 mm or another confirmed physical requirement.
  • Quantity: required metric tons.
  • Packing: 1 MT jumbo bags or another requested method.
  • Destination: destination port.
  • Incoterm: FOB / CFR / CIF or agreed term.
  • Inspection: COA / SGS / BV requirement.
  • Delivery: required shipment schedule.

Mn99.7 Electrolytic Manganese Metal FAQ

 

Q: What does Mn99.70 mean?

A: Mn99.70 means the manganese content is specified at 99.70% minimum.

Q: What are the main impurity limits in Mn99.7?

A: The current reference lists C ≤0.04%, S ≤0.05%, P ≤0.005%, Fe ≤0.03%, Si ≤0.010% and Se ≤0.10%.

Q: What is the difference between Mn99.7 and Mn99.9?

A: Mn99.7 specifies Mn ≥99.70%, while Mn99.9 specifies Mn ≥99.90%. Select the grade according to the full chemistry required by your process rather than the Mn percentage alone.

Q: Why is selenium listed in the Mn99.7 specification?

A: Se is included as a separately controlled element in the current Mn99.7 specification. If your process has a tighter Se restriction, state the required maximum before ordering.

Q: What form is Mn99.7 supplied in?

A: It is supplied as silver-gray electrolytic manganese metal flakes, with the current product specification listing approximately 1–2 mm thickness.

Q: How is Mn99.7 packed?

A: The current standard packing is 1 MT jumbo bags. Other requirements should be confirmed before quotation.

Q: Can you provide a COA?

A: Yes. COA can be provided with the applicable batch chemistry results.

Q: Can SGS or BV inspection be arranged?

A: Yes. Confirm the required inspection organization, sampling method and scope before shipment.

Q: What is the MOQ for Mn99.7 EMM?

A: The current standard MOQ is 1 metric ton.

Q: What information should I send for a Mn99.7 quotation?

A: Send the required Mn and impurity limits, quantity, flake requirement, packing, destination port, Incoterm and required inspection documents.

Request a Mn99.7 EMM Quote

 

Send us your Mn99.7 chemistry requirement, quantity, packing and destination port.

If C, S, P, Fe, Si or Se has a specific internal limit, include the exact value in your inquiry. We will confirm the applicable batch specification, inspection requirements and quotation.

Request Mn99.7 Quote

Hot Tags: 99.7% Electrolytic Manganese Metal Flakes | EMM, China 99.7% Electrolytic Manganese Metal Flakes | EMM manufacturers, suppliers, factory, manganese in rechargeable battery, manganese in geothermal energy, manganese in heat treatment, manganese in trademark, manganese in hydro energy, manganese in boring

Send Inquiry

Home

Phone

E-mail

Inquiry