Titanium rods are widely used, and monitoring their quality is also very important. Here are several titanium rod geometric size detection solutions used in production lines.
Test items
1. For outer diameter detection, the parallel light measurement method is used for detection, and the intelligent diameter gauge is used for online detection to realize data detection and analysis.
2. Ovality detection, according to the need for ovality, install a certain number of probe groups in the caliper to calculate the ellipticity size.
3. Straightness testing. The TA1 titanium rod is tested using the photoelectric method. It is an online straightness measuring instrument composed of three photoelectric measuring instruments. In addition, there is also an inner hole straightness measuring device for titanium tubes, which is based on the laser principle. Straightness measuring instrument.
4. Defect detection is a device based on the laser principle to detect surface defects of titanium rods. It can detect defects such as wrong rollers, folds, warpage, pits, grooves, lugs and other defects.
5. Length detection: based on the principle of machine vision, the length dimension detection is realized, and the theoretical length, real-time length and length deviation of the titanium rod under test are displayed. Switching the interface can display the image of the titanium rod perforation process in real time.
